TU 2241-315-05800142-2014

Aqueous emulsion of styrene-acrylic copolymer.

Application area:

It is recommended for the production of water-dispersion paint for construction purposes from glossy to matte, for external and internal use, which can be applied to masonry, plaster, asbestos cement, concrete, wood. Due to the high pigment capacity, it is effectively used in highly filled systems: plasters, putties, highly filled paints.

Can be used in the production of non-woven materials, textile coatings, glue compounds.

Product properties:

- high compatibility with pigments;

- high resistance to abrasion;

- high alkali resistance;

- high resistance to peeling, excellent adhesion;

- low sensitivity to water;

- resistance to mechanical stirring.





Milky white liquid, without mechanical impurities

Mass fraction of nonvolatile substances,%

50 ± 1

Dynamic viscosity at t (23,0 ± 0,5) ° С, Pa · s

0.5 - 1.8

Activity index of hydrogen ions, units. pH

7.5 - 9.0

Mass fraction of residual monomers,%, not more than


Minimum temperature of film formation, ° С

19 - 21

Water absorption of a free polymer film for 24 hours at a film thickness of about 250 μm,%, not more than


Persistence of paint and varnish to the statistical effect of water at t (20 ± 2) ° С, h, not less than


Recommendations for use:

When composing formulations, it is necessary to check the compatibility of the components. Dispersion is well combined with most traditional components and additives:

- coalescents: butyl diglycol acetate, texanol, white spirit;

- fillers: chalk, calcite, dolomite;

- Defoamers based on silicones and mineral oils (VUK-037, VUK-034, Foamaster, etc.);

- dispersants and wetting agents based on low molecular weight polyacrylates;

- Thickeners based on cellulose ethers, acrylates, polyurethanes.

The dispersion has antibacterial protection, but it is recommended that the preservative be added to the paint composition (Acticide MV, Acticide FI).

Due to the low water absorption of the polymer film, it is possible to reduce the flow rate of the dispersion in the water-based paint formulation:

Consumption of Akratam AS 05.1

for interior paints and varnishes


for exterior paintwork materials

up to 15%

Safety requirements:

4 hazard class


П / э container, shipment in container of the consumer is possible under the coordination.

Transportation and storage:

Transportation and storage at a temperature of not less than + 5 ° C and not more than + 35 ° C.

Keep in packaged form in closed storage rooms.

When transporting in winter, it is necessary to use insulated vehicles.

Guaranteed shelf life 12 months. Protect from direct sunlight!